HOW TO CHANGE VM GREETING ON MAIN LINE HIT MESSAGE BUTTON ENTER PIN (MAIN VM PASSWORD) PRESS “4” FOR SETUP OPTIONS PRESS “1” FOR GREETING FOLLOW PROMPTS TO SETUP GREETING HOW TO SETUP/CHECK YOUR VOICEMAIL FROM YOUR PHONE DIAL #2821 (YOUR EXTENSION) WHILE VM PROMPT COMES ON, PRESS * ENTER 2821 (YOUR EXTENSION) ENTER PIN (YOUR PASSWORD, CURRENTLY 11223344) FOLLOW PROMPTS

In Call Manager administration, click on the Device, Phone, Directory Number then select the extension.  Under Directory Number Settings, change Calling Search Space to CFALL-DHQ-CSS: Then under Call Forward and Call Pickup Settings, enter the forwarding extention in the Forward All box: Click Apply Config to save changes.

Attaxhed is the Quick Start Guide for the Cisco 8800 phone series

As part of the transition to UFCW’s new phone system, please note that you will need to re-record your voice mail greeting.   In order to record the greeting, you will need to press the message button  on your new phone.   From there,  enter the default password which is 11223344# and then follow the prompts.     Once you setup the VM, you will need to setup a new password that must be a 6 digit complex password.   The system's complex password criteria are: Must be at least six digits long and a maximum of 8 digits. Numbers only! Must not be any of your previous five PINs. Must not contain your extension number. Must not contain single or groups of repeated digits (for example, 228883, 121212, or 408408). Must not be a numerical sequence (for example, 012345 or 987654). Must not contain numbers that are dialed in a straight line on the keypad. Must not be the reverse order of your last PIN